HP12 Base

base-coat

 

Product Description

Spray or Hand Applied

HP12 Base uses 'High Polymer' technology for a cost effective, enhanced performance on difficult substrates. It is ideal as a stipple coat or for dense backgrounds and has increased water resistance and adhesion. Incorporation of Alkali Resistant Reinforcing Mesh may be required.

Click here to download the K Rend brochure

Machine Coverage Rate 1.8kg / mm thick / sq m
Require 14-18kg / sq m approx.
nominal 8-10mm thickness
Hand one coat Coverage  
Require  
Kitemark Classification Compressive Strength: CS IV
Capillary Water Absorption Category: W2
Thermal Conductivity: P=50% - 0.73 & P=90% - 0.82

Colour Range

Click on a colour to view larger image.

  • colour-1
    White
  • colour-2
    Buttermilk
  • colour-3
    Polar White
  • colour-4
    Stone
  • colour-5
    Champagne
  • colour-6
    York
  • colour-7
    Cream
  • colour8
    Powder Blue
  • colour-9
    Salmon Pink
  • colour-11
    Teracotta
  • colour-10
    Pewter Grey
  • colour-12
    Grey
  • colour-13
    Ivory
  • colour-14
    Sterling White
  • colour-16
    Sandstone
  • colour-15
    Arran
  • colour-17
    Green
  • colour-18
    Oatmeal
  • colour-20
    Fintry Stone
  • colour-19
    Cinnamon

All full colour illustrations shown in this site are as accurate as screen resolution will allow. We recommend colours be verified against samples before ordering.

nbs-logo-2 K Rend is a member of the Royal Institute of British Architect's 'National Building Specification Plus' system. www.thenbs.com

colour-chart-footer-1-newDownload Scraped Texture colour chart.

colour-chart-footer-2-newDownload Silicone Thin Coat colour chart.